BSTMN - CUT STAINLESS WIRE SHOT

  • MSDS: BSTMN
  • Manufacturer: PELLETS INC
  • Product Name: CUT STAINLESS WIRE SHOT
  • National Stock Number: 9525-00N047765
Product Identification

Product ID:CUT STAINLESS WIRE SHOT
MSDS Date:03/18/1991
FSC:9525
NIIN:00N047765
MSDS Number: BSTMN

Responsible Party
PELLETS INC
TONAWANDA, NY 14151-0307
US

Emergency Phone: 716-693-1750

Info Phone: 716-693-1880

Cage: 0DKB6

Contractor
PELLETS INC
TONAWANDA, NY 14151-0307 US

Telephone: 716-693-1880

Cage: 0DKB6

Ingredients

1333-8644)

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 1%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 20%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


IRON (III) OXIDE; (IRON)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 70%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3 (FE)


MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 2%

OSHA PEL 5 MG/M3 DUST, C

ACGIH TLV: 5 MG/M3 DUST


NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 10%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3


7440-21-2)

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 2%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


CLASSED AS HAZ WASTE & MUST BE DISPOSED OF I/A/W

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:STAINLESS STEEL PRODS IN SHOT FORM ARE
NOT CONSIDERED A HLTH HAZARD. THEY ARE AN INTERMETALLIC COMPOUND &
EMIT NO FUME. IN USE DUST MIGHT BE PRODUCED CNTNG ELEMENTS THAT MAY
AFFECT EXPOSED WORKERS. CH ROMIUM & NICKEL ARE LISTED IN NTP & IARC
AS POTENTIALLY CARCINOGENIC. HOWEVER, IT SHOULD BE NOTED THAT (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:CHROMIUM:IARC MONOGRAPHS, VOL 49, PG 49,
1990:GRP 1. NTP 6TH ANNUAL RPT ON CARCINS, 1991:KNOWN TO BE CARCIN.
(SUPDAT)
Effects of Overexposure:HLTH HAZ:A RECENT EPIDEMIOLOGICAL STUDY
PUBLISHED BY IARC FOUND NO EVID OF INCREASED CANCER RATES AMONG
SPECIALTY STEEL WORKERS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH
W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM
MD . SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .

Fire Fighting

Extinguishing Media:USE DRY CHEMICALS OR SAND TO EXCLUDE AIR.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:STAINLESS STEEL PRODS IN FORM SHIPPED ARE
NOT CONSIDERED COMBUST. DURING SUBSEQUENT USE IN SHOT BLASTING,
GENERATION OF DUST IN HIGH CONC MAY PRESENT A (SUPDAT)

Accidental Release

Spill Release Procedures:SHOT PRESENTS A HAZ UNDERFOOT BECAUSE OF ITS
SPHERICAL NATURE. NO SPECIAL PRECS NEED TO BE FOLLOWED WHEN
CLEANING UP SPILLS/LEAKS. WHEN CLEANING UP LG QTYS OF DUST A
NIOSH/MSHA APPRVD RESP SHOULD BE U SED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:OBSERVE MAXIMUM FLOOR LOADING AS SHOT
IS VERY DENSE & WEIGHS 270 LBS PER CUBIC FOOT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:SWEEPING UP SPILLS OR DUST A NIOSH/MSHA APPROVED
RESPIRATOR SHOULD BE WORN.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:APPROVED SAFETY GLASSES W/SIDE SHIELDS.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MP:>2400F,>1316C. EXPLO HAZ:MILD FIRE & EXPLO HAZ. EXPLAN OF
CARCIN:HUMAN/ANIMAL:LUNG CANCER, SKIN ULCERS. NICKEL:IARC
MONOGRAPHS ON EVALUATION OF CARCIN RISK OF CHEMS TO MAN, VOL 49, PG
257, 1990:GRP 2B. NTP 6TH ANNUAL RPT ON CARCINS, 1991:ANTIC TO BE
CARCIN. HUMAN:LUNGS, NASAL CAVITIES. WASTE DISP METH:MAY BE (ING 7)

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:SUPP DATA
Spec Gravity:7.6
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID METAL, NEAR SPHERICAL SHAPE, SILVER IN COLOR;
NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:SPILLED/SPENT SHOT CAN BE RECLAIMED FOR
REUSE/DISP OF AS NON-HAZ SOLID WASTE. IT MUST BE POINTED OUT THAT
ANY RESIDUAL FROM BLAST CLEANING OPERATION ALWAYS CONTAINS CONTAMS
FROM OBJECT BLASTED. IF THI S CNTND HAZ SUBSTANCE THEN RESIDUAL
DUST (SUPDAT)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.